FAQ

HydraSealant (Waterproof Agent)is designed to seal out water, air and moisture. Surfaces for use include roofs, gutters, skylights, flashing, chimneys, PVC pipe joints, windows, RVs and other DIY Projects.
*Please note, this product is not intended for inside of firebox or chimney stack. It may not work for all types of plastics or rubbers.

This material will be difficult to remove from a surface. For wet material, immediately wipe. Use mineral spirits to clean applicators such as brushes and rollers. A textured surface will be much harder to clean than a smooth one. For cured material, a solvent may soften the material but could damage the surface around/underneath. Gently cut or scrap the material to try and remove.

We strongly recommend wearing gloves while working on any project using Hydra Sealant (Waterproof Agent). If you do get it on your fingers or nails please follow these steps:

1. For uncured, wipe off with rubbing alcohol using a cloth or paper towel.
2. For cured material, wash with soapy water to loosen coating.

This product is not recommended for direct or indirect food contact and should not be considered food safe.

Store in a cool dry location. After each use, remove excess product from the rim of can with a dry cloth. Press or lightly tap lid shut to create tight seal.