Solufix
AQUA SEAL (Polymer Modified Cementitious Coating) 16KG
AQUA SEAL (Polymer Modified Cementitious Coating) 16KG
Couldn't load pickup availability
SOLUFIX Aqua Seal is a highly flexible two-component slurry for waterproofing and protecting concrete and masonry substrates. It provides excellent adhesion, flexibility, crack bridging ability and durability. It can be applied to various cementitious surfaces in marine structures, basement waterproofing, bathrooms, wet area waterproofing, swimming pools, roof waterproofing and water tanks, respectively.
ADVANTAGES
Simple and easy to apply
Vapor permeable (breathable)
Non-toxic and environmental friendly
Crack bridging and sealing.
Self leveling and brushable
Excellent adhesion
APPLICATION AREAS
Roof Tops
Water Tanks
Bathrooms
Basements
Swimming Pools
Foundations
Balconies
Other Wet Areas
DIRECTIONS
Clean surface of dirt, dust, grease, and all loosely adhering particles. Make sure surface is dried completely.
All cracks, holes, and honeycombs must be repaired before application.
Pre-wet the surface before application.
Apply to surface by brush, roll, trowel, dip or pour. Ensure surface is completely covered.
Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours.
MIXING INSTRUCTIONS
Pour liquid component (Part A) in a clean container slowly adding the powder component (Part B).
Mix with an electric mixer at low speed until the mixture becomes smooth and free of lumps.
PACKAGING
16KG Pack Size (Part A-5kg liquid)(Part B-11kg powder)
COVERAGE
10 – 16 SFT / KG. Actual coverage depends on porosity and texture of the substrate
SHELF LIFE
12 months from date of manufacture when stored under warehouse conditions in original un-opened packing. Extreme temperature / humidity may reduce shelf life.
