WATERPROOFING AGENT (500grams)

WATERPROOFING AGENT (Transparent)

SOLUFIX Leakage Waterproofing Agent is a flexible, rubberized coating that seals out water, air and moisture. Application is easy. It can be applied by brush, roll, trowel, dip or pouring. Once applied, the self leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, SOLUFIX Leakage Waterproofing Agent Liquid is paintable and temperature resistant resulting in lasting repairs!

PRODUCT FEATURES

• ODORLESS
• FLEXIBLE
• PAINTABLE
• TEMPERATURE/ UV RESISTANT
• SELF-LEVELING
• APPLY BY BRUSH, ROLL, TROWEL, DIP OR POUR
• CREATES A PROTECTIVE COATING
• USE ON: Roofs, Skylights, Flashing, Chimneys*, Windows, RVs, DIY Projects and More!
• GREAT FOR: Metal, Concrete, Wood, Aluminum, Brick, Tile, Fabric, Rubber**, Glass and More!

( Note: This product is not recommended for wet areas such as water tanks, bathrooms, swimming pools, ponds, etc. )

DIRECTIONS:

1. Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely.
2. Stir contents for 30 seconds until it is thoroughly mixed.
3. Apply to surface by brush, roll, trowel, dip or pour. Ensure surface is completely covered.
4. Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours.
5. NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 2~3mm. Apply between 50F and 120F.
6. PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting.
7. CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.

Technical Specs

PHYSICAL STATE: Clear Coating
APPEARANCE: Thick, Clear Liquid
COLOUR: Transparent
MATERIAL: Acrylic
INDOOR/OUTDOOR: Yes
WATER PONDING CAPACITY: 2 hours maximum
PAINTABLE: Yes
APPLICATION TEMPERATURE: 50°F – 120°F for best results
CURE TIME: 24-48 hours
GAP FILLING: up to 2~3mm
SHELF LIFE: 12 months unopened
VOLUME: 500g